Features Revolutionary new generation of fiber laser marking machine systems: 1, Its volume is small, the semiconductor module and long life (> 500,000 hours), low power consumption (160Q), high beam quality, USB interface, support WIN98/2000/XP and other operating systems;
2, Against from harsh environments and temperature change; in power failure state can use the battery and car cigarette lighter, etc. to operate. Before the appearance of the fiber laser, laser source of laser marking system generally is continuous or pulsed CO2 laser, Nd-YAG laser as the light. Co***red with traditional laser sources, it has some advantages: better performance, the semiconductor pump laser divergence angle of 1 / 4 (more suitable for precise, ***ailed marking); electro-optical conversion efficiency of lamp pumped solid laser marking machine 1 / 10; the average of work hours will last 100,000 hours;
3, fiber laser is totally air-cooled, no refrigerator, cooling water pipes and the temperature control unit and other ancillary equipment, the volume reduced, reduce energy consumption, the user cost substantially lower than traditional laser marking system.
4, ETL fiber laser pulse works in repetition frequency 10-100KHZ, the volume of finished products, average power of 10-20W outgoing fiber laser, is only 58CM * 280 * 56CM, Weight 10KG; because the laser diode is a voltage, fiber optic machine electro-optical efficiency of optical devices up to 70%, drive power can be used in the outage state support for UPS power supply, power consumption is only 160W.
Scope: Applied to all kinds of metal and some non-metallic materials used to mark and engrave, such as nylon, ABS, PVC, PES, steel, titanium, copper and so on.
Technical parameters:
Average output power: 20W
Laser wavelength :1030-1120nm
Laser output power: 10% -100% continuously adjustable
Power Supply: Single Phase AC 220V/50HZ-60HZ
Electricity power: <160W
Size: 460mm * 160mm * 250mm
Total Weight: <10.5KG
Focus spot size: <0.01mm
Marking Speed: 30mm |
Home
